3 Tips to Use a Branding Iron the Right Way

Craftsman emblem their work for identification purposes. In this newsletter, we’re going to come up with a few suggestions on the way to use a branding iron. First of all, it is critical to notice that the usage of a branding iron is pretty simple. All you want to do is warmth it up and press it onto the wooden piece. This will depart a brand or signature on the piece. However, headaches can also occur, which may additionally spoil your hard work. Let’s discover greater.

Complications of using a Branding Iron

If you do not follow the pressure lightly, the picture will have some darker and lighter spots. It won’t create a trouble within the case of trademarks and signatures in some varieties of work, but a few jobs won’t be considered complete.

If you need to apply the branding freehand, we propose that you put the timber piece at your workbench top, bending ahead and the use of the force of your hands to hold the iron and carry out the branding.

Some people prefer a drill-press attachment. The reason is that it permits you to hold the piece at your eye stage and repeat the technique as commonly as you want. Generally, it feels at ease as nicely. Also, some woods provide higher outcomes with one of a kind stages of warmth. In most cases, tougher wood calls for greater warmth than softer ones. In this case, you can maintain the iron for a bit more time.


If you want to use a drill-press attachment, you could observe the iron all over again for a better burn. You should keep the paintings piece in vicinity and take a peek underneath the branding iron for higher outcomes. If you notice that the piece desires extra warmth, all you want to do is wait a little longer. In this situation, you don’t need to make the error of shifting the wooden piece.


Since branding irons tend to get truely warm, you are more likely to burn the piece. But there’s an clean restore. You can sand the piece primarily based on the level of overburn.

Uneven Burns

It’s difficult to address choppy burns. If you’ve got a jig or drill-press machine, you can make vital adjustments in case of an choppy burn. If you need to restore it, an clean way out is to reapply the emblem. On the alternative hand, if the piece is flat, the identical method can assist restoration the trouble. The different component may be overburned and it can be fixed by using sanding.

Lastly, if you use branding irons, you’ll be in want of proper artwork, which include vector pix. For this, you may get help from a graphic fashion designer.